Announcement

Collapse
No announcement yet.

Yamaha Readout Codes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Yamaha Readout Codes

    Does anyone know where to reference the codes. Also do these numbers appear ok. The only thing I can say for certain is that 48 hours is low usage on the motor.

    Save date & Time At 22:14 On May 15 2019
    ECM No. 63P8591A30
    Model Name
    Engine Serial No. (P.I.D.#.)
    Customer Name
    Dealer Name
    1.Diagnosis
    Item Result Code
    Pulser coil Normal 13
    Engine temp sensor Normal 15
    Throttle position sensor Normal 18
    Battery voltage Normal 19
    Intake temp sensor Normal 23
    Shift position switch Normal 28
    Intake press sensor Normal 29
    Intake air passage Normal 37
    Oil press sensor Normal 39
    Engine stop lanyard switch Off 44
    Shift cut-off switch Normal 45
    Overheat thermoswitch Normal 46
    2.Diagnosis Record
    Item Occurred Code
    Shift cut-off switch 41.4 45
    4.Engine Monitor
    Monitor Item (DATA) Result Unit Monitor Item ON/OFF Result
    Engine speed 0 r/min Engine stop lanyard switch OFF
    Intake pressure 97.22 kPa Shift position switch ON
    Intake pressure 28.78 inHg Dual engine system switch OFF
    Atmospheric pressure 972.2 hPa Main switch ON
    Atmospheric pressure 28.8 inHg Overheat thermoswitch OFF
    Ignition timing - deg Shift cut-off switch OFF
    Battery voltage (12-16) 12.43 V
    TPS voltage (0.5-4.5) 0.688 V
    Throttle valve opening (-1-90) -0.3 deg
    ISC valve opening 67 %
    Fuel injection duration 0 ms
    Intake temperature (below 70) 24 °C
    Intake temperature (below 158) 75 °F
    Engine temperature (below 130) 24 °C
    Engine temperature (below 266) 75 °F
    Oil pressure (below 842) 0 kPa
    Oil pressure (below 122) 0 psi
    5.Data Logger [Engine operating hours according to engine speed]
    Engine speed Time[h]
    - 1000 r/min 22.2
    1000 - 2000 r/min 8.1
    2000 - 3000 r/min 7.1
    3000 - 4000 r/min 8.9
    4000 - 5000 r/min 1.9
    5000 - 6000 r/min 0.1
    6000 - 7000 r/min 0
    Total hours of operation 48
    6.Data Logger [Data comparison graph]
    Time Unit Engine speed Battery voltage TPS voltage Engine temperature Intake pressure Oil pressure
    [r/min] (12-16)[V] (0.5-4.5)[V] (below 120)[°C] [kPa] (below 842)[kPa]
    13 min 3450 13.5 2.62 80.5 96.2 470
    12 min 650 13.5 0.68 82 52.8 250
    11 min 650 13.5 0.68 80.5 49.8 280
    10 min 650 13.5 0.68 77.5 47.9 300
    9 min 650 13 0.68 75.5 47.9 320
    8 min 650 13.5 0.68 73.5 49.8 340
    7 min 650 13.5 0.68 72.7 46.4 360
    6 min 800 13.5 0.68 29.5 45.4 445
    5 min 650 13.5 0.68 34.5 50.8 430
    4 min 750 13.5 0.68 40 59.7 435
    3 min 700 13.5 0.68 44.7 45.9 430
    2 min 850 13.5 0.68 17 41 450
    1 min 850 14 0.68 23.5 41.5 445

    >*)))))><

    #2
    Is this what you are looking for?

    Comment

    Working...
    X